XINDE MARINE NEWS
New Bridge Alert Management (BAM) requirements are now in force DNV 2021-09-10 17:20


From 29 August 2021, navigation- and radio-communication equipment to be installed on board vessels is required to be compliant with Bridge Alert Management (BAM) according to IEC 62923-1 and 2 under the EU Marine Equipment Directive (MED). This statutory news summarizes the BAM regulations.
 
Relevant for manufacturers of navigational equipment on European flagged vessels.
 
Bridge Alert Management (BAM) is required for navigationand radio-communication equipment installed after 29 August 2021. BAM is applicable for navigation- and radio-communication equipment that can raise or present alerts on the bridge.
 
Navigation- and radio-communication equipment to be installed on EU (incl. EEA) ships after 29 August 2021 should include the IEC 62923-1 and -2 standards on BAM within the scope of the MED certificates.
 
The IEC 62923-1 and -2 standards on BAM were published in 2018 and added to the list of applicable testing standards for most navigation- and radio-communication equipment in the third Implementing Regulation (EU) 2019/1397, which was published in September 2019. The last date for installation of equipment on board an EU ship that has not been tested for compliance to the BAM standards was 29 August 2021. Manufacturers have hence had a period of approximately two years to update their products to comply with the requirements.
 
Recommendations
 
From 29 August 2021, Module B certificates for navigationand radio-communication equipment to be installed on EU (incl. EEA) ships should address the IEC 62923-1 (2018) and IEC 62923-2 (2018) testing standards within their scope.
 
Manufacturers need to have valid MED certification (Modules B+D, B+E, B+F or G certificates) to be permitted to place their products on the European market.
 
Note that the expiry date of the certificate may be overruled by changes introduced in Implementing Regulations published after the issuance of the certificate.
 
Please see the latest Implementing Regulation for the applicable requirements for the equipment when evaluating the validity of MED certificates. This is available on the DNV website at www.dnv.com/MED.
 
A re-assessment may be necessary. Please contact your local DNV office for initiation of the process of revising the certificate.

Source: DNV

The opinions expressed herein are the author's and not necessarily those of The Xinde Marine News.

Please Contact Us at:

media@xindemarine.com


展开全文

Related Posts

Tripartite reaffirms support for IMO as global regulator

International Chamber of Shipp2025-10-29

First "Special Port Fee" reportedly charged in China — USD627,943 billed to a U.S.-flagge

xinde marine news2025-10-15

Why China Sanctioned Five Hanwha Ocean U.S. Affiliates — and What Comes Next

Xinde Marine News Chen Yang2025-10-15

Rule for Rule: Inside China's Reciprocal Response to the U.S. Section 301 Port Charges

Xinde Marine News Chen Yang2025-10-13

World Shipping Council launches industry-first Cargo Safety Program to prevent ship fires

xinde marine news2025-09-16

MSC Establishes Its First Ship Management Company in China, Targeting Recruitment of 2,000 Chinese Se

xinde marine news Chen Yang2025-07-25