The U.S. Coast Guard (USCG) presented a type approval certificate for the largest PureBallast 3 reactor size: 1500 m3/h, on 15 May.
Customers can now select any PureBallast 3 system configuration for use in United States waters, said a press release.
Launched in late 2018, the 1500 m3/h reactor for PureBallast 3 is optimized for 50% more flow than the former largest reactor size. It thus enables a range of more streamlined and cost-efficient system configurations for vessels with large ballast water flows.
With USCG type approval in hand as well as IMO revised G8 type approval, those configurations are now available for use worldwide and will remain so even after 28 October 2020.
“Customers have shown great interest in the new possibilities of the 1500 m3/h reactor for PureBallast 3,” says Peter Sahlén, Head of Alfa Laval PureBallast. “Those customers who require USCG type approval can now take advantage of the full range of configurations, which extend from 32 m3/h with a skid-mounted system up to 6000 m3/h with dual systems.”
For vessels with ballast water flows of 1000 m3/h or more, the configurations encompassed by the new USCG type approval offer significant benefits. A 3000 m3/h system can be achieved with just two reactors, for example, while a 1500 m3/h system goes from two reactors to one.
“Today’s UV ballast water treatment systems are already smaller and more cost-effective to install than electrochlorination systems for large flows,” says Sahlén. “Being able to configure a PureBallast 3 system with even fewer reactors further reduces complexity and cost.”
Source:Marinelink
The opinions expressed herein are the author's and not necessarily those of The Xinde Marine News.
Please Contact Us at：
admin@xindemarine.com
